Create a Chalkboard Icon Using Photoshop and IconBuilder

Create a Chalkboard Icon Using Photoshop and IconBuilder

Tutorial Details
  • Program: Adobe Photoshop
  • Difficulty: Intermediate
  • Estimated Completion Time: 1 - 2 Hours
Download Source Files

Final Product What You'll Be Creating

Understanding the fundamental process of creating an icon in Photoshop can become a valuable skill to learn. Today we will be creating a chalkboard icon inspired the Icon Resource website by Sebastiaan de With, whom has given permission to make a tutorial inspired by his work. In this tutorial you will learn some important concepts as well as how to work with some third-party apps.


Step 1

Create a new document with the settings shown below. You can fill your background with any color, but I prefer to work with a transparent canvas. It’s up to you.


Step 2

Create a new layer folder and call it "Frame". Inside, create a new layer and call it "Wood". Select the Rectangle Tool (U) and draw a rectangle shape as shown below.

Open the Blending Options of the Layer "Wood" and apply the following styles: Inner Shadow, Inner Glow, and Gradient Overlay with the settings shown below. When you finish you will get a yellow-orange rectangle like the one shown in the last image.


Step 3

Create a new layer and call it "Wood Texture". Fill this layer with black and go to filter > noise > add noise and set the options shown below. With the same layer selected, go to filter > blur > Gaussian blur and type in the settings shown bellow in the second image. Next with the same layer selected go to image > adjustments > levels (or press cmd+L for Mac or ctrl+L for windows), and type in the settings from the third image. Finally with the same layer selected press cmd and click in the "Wood" layer to make a selection, go to select > inverse, and press backspace, to remove the extra layer and match the rectangle shape of the "Wood" layer. Change the Blending Mode to "Soft Light" and reduce the opacity to 30%. The image so far should look like the one below.


Step 4

Duplicate the "Wood Texture Layer" twice and rename them to "Wood Texture 1" and "Wood Texture 2". In the "Wood Texture 1" Change the Blending Mode to Overlay and reduce the opacity to 10%, and in the "Wood Texture 2" Set the Blending Mode to "Soft Light" and reduce the opacity to 15%. At this point you should see something like this:


Step 5

Create a new layer and call it "board". With the new layer selected hold shift and click over the "Wood" layer, this will make a selection. Go to select > modify > contract, and when the dialog box shows, enter 60px and click OK. Fill the selection with black. Right now you should have the "Wood" Layer with the orange rectangle and the "Green" Layer with a smaller black rectangle. Open up the Blending Options of the "Green" layer and apply the following styles:


Step 6

Create a new layer and name it "Board Grunge", you need a corner grunge brush set. I used the Grunge Corner Brush Pack by midnightstouch. Set the foreground color to black and select a corner brush and make some grunge effects. Set the Blending Mode to Normal and reduce the opacity to 10%. Hopefully, you came up with something like the image below:


Step 7

Create a new layer and call it "Old Effect". Make sure the foreground color is black and select a Chalk brush (these brushes are included by default in Photoshop). Set it to 100px, draw some lines to make an old effect and reduce the opacity layer to 10%. At this point you should have something like:


Step 8

Create a new layer and call it "Shadows". With the Shadow layer selected press cmd and click on the board layer to make a selection of that size, fill the new selection with black. Now go to your layer palette and make a new layer mask, select a big soft brush (about 600px) and with black as your foreground color and the brush opacity of 50% start drawing a circle in the middle of the layer. You will see that the black color start to fade; when you are happy with the result reduce the layer opacity to 50%. Your creation must look similar to:


Step 9

Here, you should fire up your creativity. Create a new layer and call it "Content". Draw whatever you want here; for the purpose of this tutorial I already have a bearing illustration ready. Make sure that all you draw or write in this layer have is white. When you are done, reduce the layer opacity to 70%. Here are some examples of what you might do in this part:


Step 10

Now we are going to grunge the content drawing. To your content layer add a layer mask like we did in Step 8 with the shadows. Select a grunge brush, I used Function Brush Set: 33 Subtle Grunge Textures & Effects, you could also use the chalk default brushes. Set the foreground color to black and add some grunge effects to your Content layer, until you feel it looks right. At this point, hopefully your image looks akin to:


Step 11

Now we’re going to do the wood joints. With the Rectangle Tool (U). Draw a 2px vertical rectangle; make sure your height is the same of your wood frame. Apply the following layer style to your shape. Then place each line in each of the corners of the frame. Select the 4 layers and merge them (cmd+E). Call this layer "Lines" and move it below the "Wood Texture" layer.


Step 12

Select all your layers and copy them by right clicking and selecting duplicate layers. Merge your new duplicate layers and press cmd+J or ctrl+J three times to duplicate your new merged layer. You can put the original layers in a folder since we need to hide them and work with the new ones. Don’t do anything to the top layer, as we are going to work with the other two copies to make the shadows. Add a Gaussian blur (filter > blur > Gaussian blur) of 5.0px to both layers. Move one of the blurry layers 3px down. This is sort of how your icon looks at this point:


Step 13

On this step you must merge your three layers and click cmd+t or ctrl+t to open the Free Transformation Tool and rotate 9 degrees counter-clockwise. Finally, resize your image to fit in your canvas.

We are finished our icon, and now we are going to learn how to prepare it and export it. You have two choices, we can use the IconBuilder from the Iconfactory, which is a Photoshop plug-in that helps you create and save your own icons in different sizes. It costs $79, with a free trial, so if you really want to learn how to do it, you can download and work with the trial version. The other choice is with an App called IMG2ICNS from Shiny Frog. Like IconBuilder, IMG2ICNS has a freeware version that you can use while you decide whether to buy it or not. This one costs just $12.90 for the Pro version, which is really cheap! So if you are interested in designing icons you may consider buying this application as it’s really a good deal.


Option 1: IconBuilder (Step 1)

Download the IconBuilder from the Iconfactory webpage provided in the last step. You need to install it, its very easy just follow the instructions. Open the "IconBuilder Essentials" Folder and you will see several folders and some tutorials and guides; we are going to search into the "IconBuilder Grid Files" folder and I’m going to open the "Expanded.psd" file.


Option 1: IconBuilder (Step 2)

Go to your icon file, and copy your icon image by pressing cmd+A (ctrl+A) and cmd+C (ctrl+C). Now go to the "Expanded.psd" file and press cmd+V or ctrl+V to paste the selection. Hide the blue icons layer and with the Free Transform Tool (cmd+T or ctrl+T) resize your icon to fit into the big square (512×512)


Option 1: IconBuilder (Step 3)

Repeat the last step with the 256, 128, 48, 32, 16 boxes.


Option 1: IconBuilder (Step 4)

Merge all the layers and go to Filter > Iconfactory > Iconbuilder. A new window will open. Make sure the initial settings are "Expanded" like the image below:


Option 1: IconBuilder (Step 5)

Click on the left arrow and the icons will fit the left boxes. Click "Save" and set the following parameters. Check the folder where you previously save your icon and you will see a new folder named "Board" and there are your new icons, ready to use in Mac and Windows, also you have a PNG copy of each size.

Now that we’ve finished with the IconBuilder, if you want an easier way to create your icons, follow these steps. We are going to use IMG2ICNS.


Option 2: IMG2ICNS (Step 1)

Go to your main icon file, and copy the image. Open a new document in Photoshop of 512×512 and paste your icon, resize the image using the Free Transform Tool (cmd+T or ctrl+T) to fit in your canvas. Save your icon in PNG format. Open IMG2ICNS and drag your file. Now, select the "ICNS" option and save the new icon in any folder you want.


Final Image

This is how your icon will look in the finder.


Conclusion

That’s it, now you have a new icon. If you are a Mac user I highly recommend you buy Candybar by Panic, to manage all your icons.

I want to give a special thanks to Sebastiaan de With for allowing me to write this tutorial inspired by one of his icons.

Leslie Nayibe is leslienayibe on Graphicriver
Add Comment

Discussion 57 Comments

  1. Süleyman B. says:

    Wow, nice Tut. I’ll test it today! 5 Stars

  2. ADrian says:

    It’s quite a nice icon.

    Thanks for the tutorial.

  3. Manuel says:

    Wow ! thanks for tis great tutorial :-) The final result of the chalkboard looks awsome !

  4. Rellik says:

    Great Article!

    Stumbled! :D

  5. Nicky Lock says:

    Great tutorial. Thanks!!!!

  6. Anoop says:

    IMG2ICNS is only for Mac-only computers. Am I right?

  7. Jonas Karlsson says:

    What´s up with all the broken pictures on the site. Has been like this for a couple of days now…?

  8. Rob says:

    Great tutorial, thanks.

  9. great looking tutorial. Loving the end result. Thanks!

  10. Nagarjun Palavalli says:

    I got to step 3. When I select the Wood Texture layer and the Wood layer and then go to Select in the menu, the inverse option cannot be selected. What do I do? I followed the steps right until that step.

    • Author

      Hi Nagarjun Palavalli,

      You have to select your “Wood Texture Layer” and if you are in a Mac press “cmd” and click on the “Wood Layer” to get the rectangle shape selected of the “Wood Layer”, now go to Select > Inverse, and press delete, and thats it.

      You want to remove all the “Wood Texture Layer” that exceeds the boundaries of the rectangle shape of the “Wood Layer”

      I’ll hope this help you.
      And sorry for my English, my native language is Spanish.

      Ohh, almost forgot, you are right theres a error in step 3, its Motion Blur instead Gaussian Blur.

      • Nagarjun Palavalli says:

        Thanks for the tutorial. Got the menu working after your suggestion. Had to use Ctrl instead of Shift on a Windows PC.

      • jasmine says:

        this is frustrating me so much, but i’m on a mac and i select both the “wood texture layer” and the “wood layer” and the inverse option isn’t clickable!

      • Jonathan says:

        I’m not seeing any resolution in the comments for the Step 3 issue of selecting the two layers and but not having Inverse available. I’m on a Mac and know how to select layers, but Inverse simply isn’t an option no matter whether I use shift or cmd. I only get Inverse as an option when I select both layers and then Select All (cmd A) but then I get a warning that no pixels are selected and there is no change in the image.

        This is a great tutorial otherwise – I like the finished product. Anybody have a workaround for the Step 3 issue?

      • Jonathan says:

        Ok, I figured this out: select wood texture only and change blend mode to soft light with 30% as indicated. Skip the double select / Inverse knockout step altogether.

  11. Lena Tailor says:

    Lovely.. Thanks for this interesting tut..

  12. mr2131 says:

    Hello, nice tut but there is a fail on Step 3.

    You use the Motion blur not the Gaussian blur.

  13. Kelly Justin says:

    wow….very nice tutorial

  14. Kinsbane says:

    Am I the only one who can’t see the tutorial images?

    When I copy/paste the source URL for this image:
    http://psdtuts.akamai.tutsplus.com/0427_Create_a_Chalkboard_Icon_Using_Photoshop_and_Icon_builder/6.jpg

    I get a 404 page not found error.

    It’s been like this all week. Do I need to be logged in or something?

  15. SaviourSix says:

    Very nice, I like the details!

  16. Author

    Thanx to all for your kind comments. I’m glad you liked the tut!

    Now, I’m working o a new tut. (http://bit.ly/bbtCye)

  17. Trizicklo says:

    I’ve also been experiencing problems viewing thumbnails and images on the site for a couple of days now. What’s up with that?

  18. VIctor says:

    in the step 3 is not gaussian blur is motion blur

    With the same layer selected, go to filter > blur > Gaussian blur and type in the settings shown bellow in the second image.

  19. Jared says:

    Simple and effective tut. Nice job :)

  20. Awesome tutorial – retweeted at once :-)

    Good to see that you also included the iconbuilder tool.

  21. You are doing such a great job man… Keep it up :)

  22. Rafa says:

    Nice tutorial!
    I don’t know if anyone knows this… but you can just make your PNG . Open the PNG using “Preview”. Select all. Copy. Then go to your application or folder and “view info”. Then click on the small thumbnail preview that the info window is showing. Now paste. The icon of the application or folder will change to your PNG (and it resizes accordingly). There, no need for fancy icon programs. This does not work with Windows…

    Rafa.

  23. Dave says:

    Lol. Nice chalkboard and “the Simpson movie” reference :D (or at least I think “I won’t download illegal stuff” is a reference to that)

  24. RJC says:

    Envato – there seems to be some issues with your images/thumbnails server or DNS – many of us have mostly broken images for the last several days. Any fixes in the works?

  25. Dave says:

    Glad to know I’m not the only one not seeing the pics on here. I was beginning to think I was going nuts.

    But it’s not only on this tutorial, it seems to be on all their tutorials for about the past week.

    Support bounced back my e-mail so I’m not sure where to notify anybody.

  26. borislav says:

    good tut and cool final result. very nice !

  27. pelumini says:

    Quite a nice tutorial, Leslie, but i’d like to know why you started an icon canvas with 1000 x 1000 instead of the standard 512 x 512 …

    • Author

      I dont know really i made them because i think i can make more detail in a bigger canvas, and better quality if you want to use them in other things like presentations, print works etc, you’ll never know thats why i think, haha

  28. Symon says:

    Nice Tut….thanks

  29. larrynom says:

    its a skateboard bearing :)

  30. Bhushan says:

    i like that very much i will try to do that
    really good tut.

  31. netomo says:

    really good!, check in the third step “gaussian blur”

  32. SkipSoft says:

    Really, Nice… Thanks

  33. mvanta says:

    Very nice tutorial, great result

  34. Rasmus says:

    There are quite a lot of fails in this tutorial:
    - Step 2 doesn’t mention the original layer one
    - Step 2 doesn’t explain the size of the rectangle, and the units on the rulers are off
    - Motion / gaussian blur in step 3
    - Missing the created layer folder in the picture of step 4
    - Shift / ctrl / cmd-confusion in step 5
    - In step 5 we are asked to create a new layer called “board”, and then asked to select the layer “green”

  35. Rasmus says:

    Now I’ve completed the tutorial. It could have been a good one, if someone had bothered to check it for fails before publishing it.

    - In step 5 the illustrations defines different angles, but uses global light. That’s not possible.
    - Step 11 is rather incomprehensible. It doesn’t mention having to rotate the rectangle.
    - In step 12 it doesn’t mention having to fill the copied layers with black

  36. in step 5, when im supposed to select board through wood, and ‘select, modify it’ it wont let me. the modify text is greyed out. what am i supposed to do?

  37. pakaworld says:

    That is a simple and beautiful work. Thank You and keep up with it.

  38. Mason Sklut says:

    That’s a very simple design, yet it really stands out! Well done!

  39. Scott Corgan says:

    I must say, one of the better looking icons you guys have made!

  40. Eyebridge says:

    Our web design team have designed a website entirely based upon such kind of “Chalkboard Effect”. Site named “flushmedia.in” !!!!

  41. Author

    Thanx for all your comments, I really appreciate it.

    :D

  42. Jerry says:

    Dope!!

  43. Tony Peacock says:

    Well documented article… the screenshots made it extremely easy to follow the step by step.

  44. jules says:

    Which font do you use for the writing ?

  45. This is a great tutorial. I love the finished product. Thanks for sharing.

  46. Theo says:

    LovelyTut. Thanks

  47. This is a Great Tutorial indeed. I have just tried this tutorial, and i got some exact design like this. Thanks for the Share.

  48. Matheus Pacheco says:

    Tutorial Chalkboard Icon – Step 3.
    In the text (line 2) is written that you have to go to ‘filter > blur > Gaussian blur’ but the illustrative image shows ‘Motion Blur’ window, wich is in fact the correct effect to apply.

Add a Comment