Final Product What You'll Be Creating
The Burn Tool is a very powerful feature in Photoshop’s toolbox. In today’s tutorial we will demonstrate how to quickly burn an object into two different textures. Let’s get started!
Step 1 – Textile
We’ll start with a textile fabric; you can find the texture here. The size of the document doesn’t matter, so you can work directly with the size of the texture, If you want to print it, work with CMYK, if not, work with RGB; we are going to experiment, so you can work with anything you like, such as 1 color logos, type, or vectors. In my case, I used the Psdtuts logo.
Step 2 – Textile
We need to prepare the logo to blend into the texture by creating a Displacement Map, this will alter the silhouette of the object, making it irregular and leaving it ready to work within the texture. Duplicate the texture layer and desaturate (Cmd/Ctrl + Shift + U); then select the desaturated layer (Cmd/Ctrl + A), copy the layer (Cmd/Ctrl + C), make a new document (Cmd/Ctrl + N) and paste it inside (Cmd/Ctrl + V), save it as displace.psd and close it.
Step 3 – Textile
Now, let’s apply the displacement map to the logo, select the object you are working with and go to filter. Go to Filter > Distort > Displace, then in the Displace Window type 3 on horizontal and vertical scale, make sure the options Stretch to Fit and Repeat Edge Pixel are selected too, and select ok; then you will select the displacement map you made for this texture (displace.psd) and select open; after doing this step, take a look at the result, if it’s too distorted, perhaps you will have to try one value down, if it’s not much of a change, then, you need to go up on the values.
Step 4 – Textile
Now we are ready to start making the burn effect. Keep in mind that this effect involves a little bit of practice with the burn tool, this is because the Burn Tool reacts differently with each texture, this also depends of the Range and Exposure of the brush you are using, so it’s not certain to get the result you expect. Before you start, remember that you will be burning the texture, this means that you can’t go back, modify or move the burn, so I suggest you duplicate the texture and give it a try with the Burn Tool, once you got the feel of it, duplicate a clean texture and layout all the things you are about to burn in the place you want them.
I recommend to use soft brushes and do a few passes playing with the Range (Highlights, Midtones and Shadows) as well with the Exposure and size of the brush. This effect needs practice and detail to really make it look really good.
Let’s make a selection of the object, in this case the logo and then move to the texture layer, select the Burn Tool and start exploring how it behaves.
Step 5 – Textile
After you’ve got the result you are looking for with the Burn Tool it should look similar to this result that blends with the texture; this can work by itself, but we can still make it better by adding some lights and shadows. Duplicate the texture and move it above all layers and name it Overlay, then Desaturate (Cmd/Ctrl + Shift + U), change Layer Blend Mode to Overlay at 40% Opacity. Make a new layer above the Overlay layer, select a soft white brush and make it a size that can fit all the object, brush blend mode set to Normal and 100% Opacity; then set the Layer Blend Mode to Overlay at 40%. We are now finished with the textile texture.
Step 6 – Paper
Let’s move on to a paper texture, the process will be exactly the same as it was with the textile texture, just remember to explore how the Burn Tool will react with the paper texture; to make it more interesting, we will blend some paper textures and play around with the Hue and Saturation as well with the Burn Tool to make an interesting texture to work with.
You can find some interesting textures here (old paper) and here (texture paper); make a new document and put them together, we’ll use shape of the texture paper (make them the same size no matter if you stretch them to fit), make a selection of the texture paper silhouette, select the old paper and Inverse the selection (Cmd/Ctrl + Shift + I) and erase, you will end up with this.
Step 7 – Paper
Remember that this is a new texture, so you have to test how the burn will work on it, so duplicate this layer just in case. The old paper texture looks very pale, go ahead and play with the Hue and Saturation (Cmd/Ctrl + U), then with the Burn Tool go work on the edges to burn and some parts of the center too.
Move the texture paper above and set the Layer Blend Mode to Linear Burn at 90% Opacity, duplicate the layer (same blending mode) at 90% Opacity, it will look something like this.
Step 8 – Paper
To save some time and steps, let’s use the same object you used in the earlier exercise, it will already have the displace filter applied to it to make it blend with the texture.
Remember to duplicate the old paper texture to practice, then make a selection of the object and start burning, pay attention how the burn tool reacts with this new texture, when you are done, it should look something similar to this.
Step 9 – Paper
Now we have a good burn on paper that can work, but let’s add some more details for a better result. Duplicate the texture paper and move it above all layers and name it Overlay, then Desaturate (Cmd/Ctrl + Shift + U), change Layer Blend Mode to Overlay at 40% Opacity. Make a new layer above the Overlay layer, select a soft white brush and make it a size that can fit all the object, brush blend mode set to Normal and 100% Opacity; then set the Layer Blend Mode to Overlay at 40%.
Now that you know the power of this tool, keep exploring it; check out the results you can achieve with this tool, here are some examples I made. This is a very basic and easy effect, just need some experimentation in order to get the feel of the Burn Tool, it has a lot of potential if you know how to use it and how to combine it to get awesome results. I encourage you to give it a try on new textures, see how it works, keep trying and practicing; sometimes basic things are the ones that take the final piece to another level; if you want to keep trying out this tool with other textures I recommend you check out CG Textures.